MAGWELL - for Canik MC9L / MC9LS / PRIME

**READ THE DESCRIPTION**
Black or FDE available.
 
Now MC9LS and MC9L owners can have a magwell too! Fits the OEM 17rd mags.
Magwells make reloads easier and faster, without adding a ton of bulk to your pistol. This also locks your pinky finger into the grip which feels awesome on the MC9L/LS. Gives an improvement in grip feel. 
 
INCLUDES: MAGWELL (printed polymer) and M3 flat head screw
INSTALL:
1. Ensure pistol is unloaded! 
2. Slip magwell onto the bottom of the grip, from front towards rear.
2. Ensure it is seated and parallel with the bottom of the grip. 
3. Push the rear portion of the magwell where the screw hole is backward so the screw lines up. It is a tight fit on purpose.
4. The M3 screw may be either Torx or 2mm allen key. Depending on what screw you have, use a 2mm allen wrench or the small torx bit from your little Canik pistol tool that came in the case. Lightly tighten the screw. Don't over-tighten, it just needs to be snug.
5. Test function by inserting and ejecting magazines. 
6. Enjoy!
 
This is a plastic magwell for the Canik MC9L/LS printed in glass fiber reinforced polymer, which is similiar to what the pistol frame itself is made out of. Similiar to the aluminum factory magwell that comes with the MC9 Prime. Fits and functions with some of our other MC9L/LS/Prime baseplates such as this +4 baseplate: 19RD PENNY BASEPLATE FOR CANIK MC9L/LS/PRIME | HurleyWelding .
DOES NOT WORK WITH OUR MC9LS 18+2 baseplate or MC9LS 18rd sleeves!
 
DISCLAIMER: Although this polymer is strong and impact resistant, there are NO durability guarantees. The magwell may break if you drop your pistol on a hard surface at the right angle. This should not affect short term function of the pistol. HurleyWelding takes no responsibility for what you put on your pistol. If you break one, send us pictures so we can try to help you with a replacement.